
Corrosion resistance of welded steel tubes
Release Time :
2022-07-13 00:00
When the T-welded steel pipe contains Ni, it has strong corrosion resistance in the acidic environment. In the environment containing sulfuric acid or hydrochloric acid, the higher the content of Ni in the T-welded steel pipe, the stronger the corrosion resistance. In the general environment, just add Cr to T-welded steel pipe can prevent the occurrence of erosion phenomenon. The poor condition of steel strip edge is another important cause of wrong edge. Effect of mass flow rate, heat flux and structural parameters (ratio Dc/D of spiral curvature diameter to T-welded steel pipe diameter) on saturated bubble boiling heat transfer coefficient in vertical spiral pipe.
In the production of T-welded steel pipe, the wrong edge often occurs, and there are many influencing factors. In production practice, steel pipe is often degraded by the wrong edge. Therefore, it is necessary to analyze the causes of spiral steel pipe misalignment and its preventive measures.
Due to the poor shape and dimensional accuracy of the untrimmed steel lead and tail, it is easy to cause hard bending of the steel belt and cause wrong edge. Simulation parameters range: vertical pipe: pipe diameter D=lOmm, pipe length L=660mm; Three kinds of vertical T-welded steel pipes: pipe diameter D=10mm, the ratio of curvature diameter of T-welded steel pipes to spiral pipe diameter changes are Dc/D= 15,20,25, spiral pitch Pt=20mm, pipe length L=503mm, L=660mm, L=817MM. Mass flow G=200~400Kg/(m'2·s), heat flux q=5~15KW/m'2, saturation pressure p, saturation =0.414880MPa, saturation temperature T, saturation =283.15K.
RELATED NEWS
2023-10-11
The production process of seamless steel pipe
① Main production process of hot rolled seamless steel pipe (△ main inspection process) : Preparation and inspection of tube blank △ heating of tube blank → perforation → Rolling pipe → reheating of steel pipe → fixing (reducing) diameter → heat treatment △ straightening of finished pipe → finishing → inspection △ (non-destructive, physical and chemical, table inspection) → storage
2023-07-12
What are the uses of seamless steel pipe
Seamless steel pipe has hollow section, widely used for conveying fluid pipeline, such as conveying oil, natural gas, gas, water and some solid materials, etc. Compared with solid steel such as round steel, steel pipe is a kind of economic section steel because of its light weight and the same bending and torsional strength.
2023-03-06
The steel type of thick steel plate is roughly the same as that of thin steel plate.
Steel tubes made of a single piece of metal with no seams on the surface are called seamless steel tubes. According to the production method, seamless pipe is divided into hot rolled pipe, cold rolled pipe, cold drawn pipe, extrusion pipe
2022-10-30
Performance index of steel pipe
The mechanical property of steel is an important index to guarantee the final serviceability (mechanical property) of steel, which depends on the chemical composition and heat treatment system of steel. In the steel pipe standard, according to different use requirements, the tensile properties (tensile strength, yield strength or yield point, elongation) and hardness, toughness indicators, as well as user requirements of high, low temperature performance.