
Performance index of steel pipe
Release Time :
2022-10-30 00:00
The mechanical property of steel is an important index to guarantee the final serviceability (mechanical property) of steel, which depends on the chemical composition and heat treatment system of steel. In the steel pipe standard, according to different use requirements, the tensile properties (tensile strength, yield strength or yield point, elongation) and hardness, toughness indicators, as well as user requirements of high, low temperature performance.
① Tensile strength (σb)
The stress (σ) obtained by dividing the maximum force (Fb) of the specimen at tensile break by the original cross-sectional area (So) of the specimen in the tensile process is called the tensile strength (σb), and the unit is N/mm2 (MPa). It represents the maximum capacity of a metal material to resist damage under tensile force.
② Yield point (σs)
For metal materials with yield phenomenon, the stress at which the specimen can continue to extend without increasing the force (keeping constant) during the tensile process is called yield point. If the force drops, the upper and lower yield points should be distinguished. The unit of yield point is N/mm2 (MPa).
Upper yield point (σsu) : the maximum stress of the specimen before the first drop in force due to yield; Lower yield point (σsl) : the minimum stress in the yield stage, excluding the initial instantaneous effect.
RELATED NEWS
2023-10-11
The production process of seamless steel pipe
① Main production process of hot rolled seamless steel pipe (△ main inspection process) : Preparation and inspection of tube blank △ heating of tube blank → perforation → Rolling pipe → reheating of steel pipe → fixing (reducing) diameter → heat treatment △ straightening of finished pipe → finishing → inspection △ (non-destructive, physical and chemical, table inspection) → storage
2023-07-12
What are the uses of seamless steel pipe
Seamless steel pipe has hollow section, widely used for conveying fluid pipeline, such as conveying oil, natural gas, gas, water and some solid materials, etc. Compared with solid steel such as round steel, steel pipe is a kind of economic section steel because of its light weight and the same bending and torsional strength.
2023-03-06
The steel type of thick steel plate is roughly the same as that of thin steel plate.
Steel tubes made of a single piece of metal with no seams on the surface are called seamless steel tubes. According to the production method, seamless pipe is divided into hot rolled pipe, cold rolled pipe, cold drawn pipe, extrusion pipe
2022-10-30
Performance index of steel pipe
The mechanical property of steel is an important index to guarantee the final serviceability (mechanical property) of steel, which depends on the chemical composition and heat treatment system of steel. In the steel pipe standard, according to different use requirements, the tensile properties (tensile strength, yield strength or yield point, elongation) and hardness, toughness indicators, as well as user requirements of high, low temperature performance.